Planet Gear Sub Assembly - JLG 600SJ Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE
15. Slide the Planet Gear Subassembly (4) out of the
Spindle (1A) being careful to not drop the Needle
Bearings (4C) in the process.
16. Remove 4 Thrust Washers (4B), 28 Needle Rollers
(4C) and the Thrust Spacer (4D) from the Second
Stage Planet Gear (4F).
3-6
17. Repeat Steps 12 though 16 for the remaining two
18. Remove the Thrust Washer (4H) from the counter-
4B. Thrust Washer 4D. Thrust Spacer
4C. Needle Roller 4F. Planet Gear
Figure 3-3. Planet Gear Sub Assembly
– JLG Lift –
Planet Gears (4F).
bore in the Spindle (1A).
3121202