Foot Switch Adjustment - JLG 600SJ Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM

4.11 FOOT SWITCH ADJUSTMENT

Adjust so that functions will operate when pedal is at cen-
ter of travel. If switch operates within last 1/4 in. (6.35 mm)
of travel, top or bottom, it should be adjusted.
4-38
NOTE: If any rotator bolts are replaced, all bolts
A,B,D
C,D
A Torque to 50 ft.lbs. (68 Nm)
B Loctite #242
C Torque to 480 ft. lbs. (650 Nm)
D Check torque every 150 hours of operation
E Torque to 85 ft. lbs. (115 Nm)
Figure 4-33. Platform Support Torque Values
– JLG Lift –
on the rotator should be retorqued.
E
3121202