Copying Files To An Msfc - Cisco 6500 Series Software Configuration Manual

Hide thumbs Also See for 6500 Series:

Table of Contents

Configuring RPR and RPR+ Supervisor Engine Redundancy

Copying Files to an MSFC

This example shows how to perform an FSU:

Router# config terminal

Router(config)# config-register 0x2

Router(config)# boot system flash slot0: c6sup22-jsv-mz.121-11.E

Router# copy running-config start-config

Router# hw-module reset

Router# redundancy force-switchover

Copying Files to an MSFC

Use the following command to copy a file to the bootflash: device on an active MSFC:

Router# copy source_device:source_filename bootflash:target_filename

Use the following command to copy a file to the bootflash: device on a redundant MSFC:

Router# copy source_device:source_filename slavebootflash:target_filename

Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E