Cisco 6500 Series Software Configuration Manual page 69

Chapter 4 Configuring EHSA Supervisor Engine Redundancy
Supervisor Engine Redundant Operation
Use the following command to copy a file to the bootflash: device on a redundant supervisor engine:
Router# copy source_device:source_filename slavesup-bootflash:target_filename
Use the following command to copy a file to the bootflash: device on a redundant MSFC:
Router# copy source_device:source_filename slavebootflash:target_filename
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
4-5
78-14099-04