Cisco 6500 Series Software Configuration Manual page 117

Chapter 7 Configuring LAN Ports for Layer 2 Switching
–
–
–
–
–
–
You cannot configure a custom EtherType field value on the ports in an EtherChannel.
•
You cannot form an EtherChannel from ports that are configured with custom EtherType field
•
values.
This example shows how to configure the EtherType field value to 0x1234:
Router (config-if)# switchport dot1q ethertype 1234
Router (config-if)#
78-14099-04
WS-X6516-GBIC
The WS-X6516A-GBIC and WS-X6516-GBIC modules apply a configured custom
Note
EtherType field value to all ports supported by each port ASIC (1 through 8 and
9 through 16).
WS-X6516-GE-TX
WS-X6748-GE-TX
WS-X6724-SFP
WS-X6704-10GE
WS-X6816-GBIC
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
Configuring LAN Interfaces for Layer 2 Switching
7-17