Sleep Timer Function; Quick Select Function; Various Memory Functions; Last Function Memory - Denon AVR-E200 Owner's Manual

Sleep timer function

You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for viewing and listening while
going to sleep.
SLEEP
Press and display the time you
want to set.
The SLEEP indicator on the display lights.
• The time switches as shown below each
SLEEP
time is pressed.
Off 10 min 20 30
120 100 90 80
110
To cancel the sleep timer
SLEEP
Press to set "Off".
The SLEEP indicator on the display turns off.
• If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
• The sleep timer setting is cancelled if this unit's power is set to
standby or turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
DVD

Quick select function

You can save settings such as the input source selection, volume
level, and sound mode at the
You can simply press one of the set
subsequent playback to switch to various saved settings all at once.
• By saving frequently used settings at the
buttons, you will always be able to easily call up the same playback
environment.
Press QUICK SELECT
The Quick Select settings for the button you
pressed are called up.
40 50
70 60
• The default settings of each Quick Select function are as shown
below.
Input
Button
source
QUICK
CBL/SAT
SELECT 1
QUICK
Blu-ray
SELECT 2
QUICK
GAME
SELECT 3
QUICK
AUX
SELECT 4
Changing the settings
1
Set the items below to the settings
you want to save.
q Input source (vpage 15)
w Volume (vpage 16)
e Surround mode (vpage 19)
r Video Source (vpage 33)
2
Press and hold the desired
"Quickz Memory" appears on the display.
The current settings will be memorized.
QUICK SELECT
If on the main unit is pressed, the same function as
with the remote control unit can be obtained.
QUICK SELECT 1 4
– buttons.
QUICK SELECT
buttons for
QUICK SELECT 1 – 4
.
Sound Video
Volume
Mode Source
MULTI CH
40 SOURCE
STEREO
QUICK SELECT until
28

Various memory functions

Personal memory plus function
This function sets the settings (input mode, surround mode, HDMI
output mode, audio delay etc.) last selected for the individual input
sources.
The surround parameters, tone control settings and the volumes of
the different speakers are stored for the individual surround modes.

Last function memory

This function stores the settings which were made before going into
the standby mode.
When the power is turned back on, the settings are restored.