Developing Section; Detaching And Refitting The Developing Unit - Kyocera FS-9530DN Service Manual

1-5-5

Developing section

(1) Detaching and refitting the developing unit

Follow the procedure below to replace the developing unit.
Procedure
1. Open the front cover.
2. Remove the toner container and waste toner
box.
3. Remove the pin and turn the developing
release lever in the direction of the arrow.
4. Remove the developing unit.
5. Replace the developing unit and install the
unit.
Developing release lever
Pin
Figure 1-5-38
Developing unit
Figure 1-5-39
2GZ/2G1-2
1-5-17