Kyocera FS-9530DN Service Manual page 46

2GZ/2G1-2
Maintenance
item No.
Setting finisher stack quantity
U237
Description
Sets the number of sheets of each stack on the main tray and on the internal tray in the optional finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Enter the maintenance mode and press the cursor up/down keys to display [U237].
>Adjust Finish.>
[U237]Limit
2. Press the cursor right key to display the submenu screen.
3. Press the cursor up/down keys to select the item for which the preset value is to be changed.
Submenu display
>>Main Tray
>>Middle Tray
4. Press the OK key. [ ? ] will blink.
>>Main Tray
[237.1] ? 3000
5. Press the cursor up/down keys to change the setting.
6. Press the OK key. The value is set.
To keep the setting, press the CANCEL key.
7. Turn the main switch off and on.
1-3-14
Description
Description
Number of sheets of stack on the main tray
Number of sheets of stack on the internal tray
for sort or staple printing
Setting Initial
range setting
3000/1500 3000
50/30 50