Kyocera FS-9530DN Service Manual page 55

Maintenance
item No.
Setting FRPO
U399
Description
Set the firmware again.
Purpose
To change the preset values of firmware.
Method
1. Enter the maintenance mode and press the cursor up/down keys to display [U399].
>Set FRPO
[U399] Parameter
2. Press the cursor right key to display the submenu screen.
3. Press the cursor up/down keys to select the item for which the preset value is to be changed.
4. Press the OK key. [ _ ] will blink.
>>FRPO
[399.1]
5. Press the cursor right/left keys to move [ _ ] to the digit position at which the value is to be changed and
press the cursor up/down keys to change the preset value.
6. Press the OK key. The value is set.
To keep the preset value, press the CANCEL key.
>
HO
Description
2GZ/2G1
1-3-23