Kyocera FS-9530DN Service Manual page 44

2GZ/2G1
Maintenance
item No.
Turning the fuser heater on
U196
Description
Turns the fuser heater M or S on.
Purpose
To check fuser heaters turning on.
Method
1. Enter the maintenance mode and press the cursor up/down keys to display [U196].
>Turn Fixing
[U196] Heater ON
2. Press the cursor right key to display the submenu screen.
3. Press the cursor up/down keys to select the heater to turn on.
Submenu display
>>Main Heater ON
>>Sub Heater ON
4. Press the OK key. [Execute] will be displayed and the heater will be turned on for three seconds.
Note
Do not open or close the cover when the heater is on. Either do not turn on the heater continuously.
>>Main Heater ON
[196.1] Execute
5. To turn off the heater, press the OK key or the CANCEL key.
Checking the fuser temperature
U199
Description
Displays the fuser temperature, the ambient temperature and the absolute humidity.
Purpose
To check the fuser temperature, the ambient temperature and the absolute humidity.
Method
1. Enter the maintenance mode and press the cursor up/down keys to display [U199].
>Display TEMP
[U199]
2. Press the cursor right key to display the submenu screen.
>>FIX CENT. TEMP
[U199.1]
3. Press the cursor up/down keys to select the item to check.
Submenu display
>>FIX CENT. TEMP
>>FIX EDGE TEMP
>>SURROUND TEMP
>>HUMIDITY
1-3-12
>
Description
Fuser heater M (FH-M)
Fuser heater S (FH-S)
>
###
Description
Fuser center temperature (
Fuser edge temperature (
Ambient temperature (
Absolute humidity (%)
Description
°
C)
°
C)
°
C)