Downloading The Firmware From The Memory Card - Kyocera FS-9530DN Service Manual

(2) Downloading the firmware from the memory card

The procedure below provides how to download firmware from a memory card.
Procedure
1. Turn the main switch off.
2. Insert the memory card into the printer's
memory card slot.
3. Turn the main switch on.
4. Press Menu key on the printer's operation
panel and carry out the memory card for-
matting procedure (1).
5. When formatting is complete, turn the main
switch off.
6. Remove the formatted memory card from
the memory card slot.
7. Insert the memory card to the PC's slot or to
the adaptor.
8. Copy the firmware file to download to the
root directory of the memory card.
9. Remove the memory card from the PC's slot
or the adaptor.
Memory card
Figure 1-6-4
Message display
Ready
Press the Menu key.
Memory Card >
Press the right key.
>Format
(1)
Press the OK key.
>Format ?
Press the OK key.
Processing
(Format information is
automatically printed.)
Ready
Figure 1-6-5
Memory card
Figure 1-6-6
2GZ/2G1
Memory
card slot
Operation panel keys
Press the cursor up/down keys.
Press the cursor up/down keys.
Adaptor
(Memory card read/writer)
To PC
1-6-3