1-6-5
Developing section
(1) Detaching and refitting the developing unit
Follow the procedure below to replace the developing unit.
Procedure
1. Remove the drum unit (see page 1-6-38).
2. Remove the two connectors from the devel-
oping unit.
3. While lifting the developing unit a little,
remove the unit from the MFP.
4. Replace the developing unit and refit all the
removed parts.
Connector
Figure 1-6-73-1
Developing unit
Figure 1-6-73-2
2FT-3.0
Connector
1-6-41