Table of Contents
Advertisement
Note
If Quick Arm feature is on,
an access code is not
required to arm the system
to Level 2— STAY.
Note
If Quick Arm feature is on,
an access code is not
required to arm the system
to Level 3— AWAY.
Note
Contact your installer if you
want to use this feature.
Security Pro 7000
•
Before opening a door or window while inside or outside the home or business. When you
wake up in the morning and want to get your newspaper, you must disarm the system before
opening the door to prevent an accidental alarm.
•
To stop sirens and cancel an alarm. When an alarm condition occurs disarming the system
turns off any sirens.
¾
To disarm to Level 1—OFF using a touchpad:
1
1. Press
. Touchpads display "ENTER CODE."
2. Enter your Access Code. Touchpads display date and time or programmed text and the sys-
tem sounds one long beep.
¾
To disarm to Level 1—OFF using a keychain touchpad:
1. Press the
Unlock button.
Arming Level 2—STAY
There are times when you want intrusion protection, but still want the freedom to move around
within your house without setting off an alarm. For example, in the evening when your family is
inside for the night. In this and similar situations, set your system to 2—STAY.
¾
To arm to Level 2—STAY using a touchpad:
1. Close all protected perimeter doors and windows.
2
2. Press
at any touchpad. Touchpads display, "ENTER CODE."
3. Enter your Access Code. Touchpads display, "Armed to STAY" and the system sounds two
short beeps.
4. If leaving the premises, exit through a designated delay door immediately.
¾
To arm to Level 2—STAY using a keychain touchpad:
1. Press the
Lock button.
Arming Level 3—AWAY
At other times, you want every sensor to be alert when the family goes on vacation, or at closing
time.
In this and similar situations, set your system to 3—AWAY for maximum protection. All sensors
are active—perimeter door and window sensors, and interior motion detectors.
¾
To arm to Level 3—AWAY using a touchpad:
1. Close all perimeter doors and windows.
3
2. Press
at any touchpad. Touchpads display, "ENTER CODE."
3.
Enter your Access Code. Touchpads display, "ARMED TO AWAY" and the system sounds
three short beeps.
4.
Exit through a designated delay door immediately.
¾
To arm to Level 3—AWAY using a keychain touchpad:
1.
Press the
Lock button twice to go from Level 1 to Level 3, or once to go from Level 2 to
Level 3.
Quick Arm
The Quick Arm feature lets you arm your system without using an access code. You will still
need to enter an access code to disarm the system.
¾
Quick Arm to Level 2:
1. From Level 1--Press 2.
¾
Quick Arm to Level 3:
1. From Level 1 or 2--Press 3.
7
Advertisement
Table of Contents
