Propeller Selection - TOHATSU 40B2 Owner's Manual

24 INSTALLATION
■ Power Trim and Tilt type
EPTO 75, 90, 115
4
Washer
(small diameter)
Bolt (12mm
ø13
0.5"
Notes
1. Apply sealing agent such as silicon
sealer between bolts and transom
board holes before tightening bolts.
2. Be sure to tighten mounting bolt
nuts to specified torque.
Washer
(large diameter)
Nut
length 105mm)
327
Top of
12.9"
Transom
51 2"
17.5 0.7"
17.5 0.7"
17.5 0.7"
251
9.9"
2.

Propeller Selection

A propeller must be selected so that
the engine rpm measured at wide
open throttle while cruising is within
the max. operating range;
5,150 to 5,850 rpm
For genuine propellers, refer to
Propeller Table of this manual.
Notes
The 75, 90,115 model is supplied with
no standard propeller. In other words,
it is shipped from the factory without a
propeller.