TOHATSU 40B2 Owner's Manual page 48

Hide thumbs Also See for 40B2:
Table of Contents

Advertisement

48 ENGINE OPERATION
④ Release the main switch key as
soon as the engine starts. The
key will return to the "ON" position
automatically.
WARNING
!
Do not operate the engine with gear
case out of water.
Severe personal injury, or engine
damage will result.
!
Do not keep turning starter motor for
6
over 5 seconds, or the battery may
be consumed, potentially making the
engine starting impossible and/or
damaging the starter.
If cranking over 5 seconds fails to start
engine, return main switch to "ON", and
crank engine again after 10 seconds or
more.
CAUTION
■ EPTO type
① Insert the key into the remote
control box.
② Set the Remote Control lever to
Neutral (N).
Neutral (N)
Fully opened
Note
Turn the free accel lever to the fully
closed position, before turning the
main switch key to "ON".
The wrong operation i.e. turn the main
switch key to "ON" on the condition
that the lever is opened will be
memorized by ECU (engine control
unit).
If this wrong operation has done
repeatedly, it will have a possibility
that the three warning lamps flash.
In this case, turn the lever to the fully
closed position and start the next
operation after returning the main
switch key to "OFF".
Note
The free accel lever can not be raised
when the control lever shift is in
Forward or Reverse.
Control lever
Fully closed
Free Accel lever
Ignition key
Stop switch

Advertisement

Table of Contents
loading

This manual is also suitable for:

50b290c2115a275c2Md 30b2

Table of Contents