Stopping The Engine - TOHATSU 40B2 Owner's Manual

Hide thumbs Also See for 40B2:
Table of Contents

Advertisement

5. Stopping the engine

WARNING
!
● Do not shift into Reverse during
planning, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
● Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering system
and/or shifting mechanism may be
damaged.
CAUTION
!
Never stop the engine immediately
after a full throttle run. Keep it running
for two or three minutes at idling speed
(Shift Lever set to Neutral) to allow it to
cool down.
■ EFO, EFTO type
① Reduce the engine speed to idling
rpm.
② Turn the Main Switch to "OFF". The
engine will then stop.
Main switch
Stop switch lock
ENGINE OPERATION
■ EPTO type
① Move the Remote Control lever to
Neutral (N) and let the engine idle
for 2-3 minutes to allow it to cool
down.
Neutral (N)
② Turn the main switch key counter-
clockwise.
The engine will stop.
OFF
Stop switch
lock plate
55
6
ON

Advertisement

Table of Contents
loading

This manual is also suitable for:

50b290c2115a275c2Md 30b2

Table of Contents