TOHATSU 40B2 Owner's Manual page 49

Hide thumbs Also See for 40B2:
Table of Contents

Advertisement

③ Turn the main switch key to "ON",
and wait a few seconds until the
sound of the warning buzzer stops.
OFF
④ Continue turning the key clockwise
to start the engine.
When the engine starts, release
the key and allow it to return to
"ON".
OFF
ON
START
ON
START
ENGINE OPERATION
Note
If the main switch key is pressed for
1(one) second during idling or trolling
operation, the buzzer sounds and
engine revolution changes.
Each time the main switch key is
pressed in the above manner, engine
speed changes as follows.
700 → 800 → 900 → 800 → 700 →
800 → 900rpm →
WARNING
!
Do not operate the engine with gear
case out of water.
Severe personal injury, or engine
damage will result.
CAUTION
!
Do not keep turning starter motor for
over 5 seconds, or the battery may
be consumed, potentially making the
engine starting impossible and/or
damaging the starter.
If cranking over 5 seconds fails to start
engine, return main switch to "ON", and
crank engine again after 10 seconds or
more.
If the starter motor fails to operate
49
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

50b290c2115a275c2Md 30b2

Table of Contents