Manual Record; Manual Record Menu; Basic Operation; Enable/Disable Record - Optiview VRHT Quick Start Up Manual

z
Please note the tour function has the higher priority than the preview playback. You can
not control the preview playback until the tour function ended.

2.3 Manual Record

Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.

2.3.1 Manual record menu

There are two ways for you to go to manual record menu.
z
Right click mouse or in the main menu, Advanced->Manual Record.
z
In live viewing mode, click record button in the front panel or record button in the remote
control.
Manual record menu is shown as in Figure 2-7.

2.3.2 Basic operation

There are three statuses: schedule/manual/stop. Please highlight icon"○" to select
corresponding channel.
z
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
z
Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)
z
Stop: All channels stop recording.

2.3.3 Enable/disable record

Please check current channel status: "○" means it is not in recording status, "●" means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 2-8.

2.3.4 Enable all channel recording

Figure 2-7
Figure 2-8
11