Waypoint Marker; Alarm Message - Furuno FR-8045 Operator's Manual

1.38

Waypoint Marker

The waypoint marker shows the location of the destination waypoint set on a naviga-
tion plotter. The heading signal or course data are required. You can turn on/off the
waypoint marker as follows:
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
5. Press the MENU key to close the menu.
1.39

Alarm Message

The alarm status window shows all current alarms.
Note: The alarm status window is not automatically displayed when an alarm occurs.
1. Press the MENU key to open the menu.
2. Use
Waypoint marker
or to select [Others] and press the ENTER key.
or to select [WPT Mark] and press the ENTER key.
WPT Mark options
or to select [Off] or [On] then press the ENTER key.
or to select [Alarm] and press the ENTER key.
Waypoint
marker
+
Off
On
1. OPERATION
1-45