Target Trails; Trail Time - Furuno FR-8045 Operator's Manual

4. Use
[Off]: Deactivates the echo average.
[1]: Identify true targets from the sea clutter and reduce the brilliance of echoes
which are not stable.
[2]: Identify true targets from the sea clutter that you cannot reduce the brilliance
with setting 1.
[Auto]: Identify true targets from the sea clutter. Detect the far targets and targets
which are not stable.
5. Press the MENU key to close the menu. The selected echo average ("EAV 1",
"EAV 2" or "EAV(A)") appears at the lower-left corner of the display.
1.24

Target Trails

The trails of the radar targets can be shown with an artificial line to check target move-
ment. The target trails are selected for either relative or true. True motion trails require
a heading signal and position data.
1.24.1

Trail time

1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
change between on and off.
5. After setting all options, use the CursorPad ( ) to select [EXIT? YES] and press
the ENTER key.
6. Press the MENU key to close the menu.
or to select an echo averaging option and press the ENTER key.
or to select [Target Trails] and press the ENTER key.
or to select [Time] and press the ENTER key.
15s On
On
30s
1min On
3min On
On
6min
On
15min
On
30min
Continuous On
EXIT? YES
Time options
or to select time and press the ENTER key. Press the ENTER key to
Press the ENTER key
to change between
on and off.
1. OPERATION
1-29