Cursor - Furuno FR-8045 Operator's Manual

1. OPERATION
1.13

Cursor

The cursor functions to find the range and bearing (default function) to a target or the
latitude and longitude position of a target. Use the CursorPad to move the cursor into
position and read the cursor data at the screen bottom.
Cursor data
You can show the cursor data as range and bearing (from your ship to the cursor) or
latitude and longitude. Position and heading signal are required.
1. Press the MENU key to open the menu.
2. Use
Brill/Color
Display
Echo
Custom 1
Custom 2
Custom 3
Alarm
Target Trails
Tuning
Others
Target
Choosing display mode of cursor position
1-14
0.5
NM
+ 110.1° R
Cursor data
(range and bearing,
or latitutde and longitude)
or to select [Others] and press the ENTER key.
Menu
F1 Setup
F2 Setup
F3 Setup
WPT Mark
EBL Reference
VRM Unit
Cursor Position
TLL Key Mode
[ENTER]: Enter
[MENU] Exit
Others menu
+ Cursor
0.488 NM
Others
: Gain Mode
: Sea Mode
: A/C Auto
: Off
: Relative
: NM
: Rng/Brg
: TLL Output
[CANCEL/HL OFF]: Back