Dynamic Range - Furuno FR-8045 Operator's Manual

To show or hide the navigation data at the bottom of the screen, do the following:
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
[Off]: Turn off the data display.
[Nav]: Navigation data
[Target]: ARPA and AIS target data (See section 3.8 and section 4.5.)
[All]: Navigation data plus ARPA and AIS target data
5. Press the MENU key to close the menu.
1.36

Dynamic Range

You can change the dynamic range to erase unwanted weak echoes (sea reflections,
etc.). Select [Narrow], [Normal] or [Wide] depending on conditions.
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
[Narrow]: Erase weak echoes.
[Normal]: Normal use
[Wide]: Display weaker echoes compared to [Narrow].
5. Press the MENU key to close the menu.
or to select [Display] and press the ENTER key.
or to select [Data Box ] and press the ENTER key.
Off
Nav
Target
All
Data Box options
or to select an option and press the ENTER key.
or to select [Echo] and press the ENTER key.
or to select [Display-Dynamic] and press the ENTER key.
Narrow
Normal
Wide
Display-Dynamic options
or to select [Narrow], [Normal] or [Wide] then press the ENTER key.
1. OPERATION
1-43