How To Display The Targets Within A Specific Sector; Number Of Targets To Display - Furuno FR-8045 Operator's Manual

4.8 How to Display the Targets within a Specific Sec-
tor
You can display AIS targets only within a specified sector. If the target sorting method
is selected to [Sector], the target data within the sector set here are transmitted to this
radar.
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
5. Use
6. Use
7. Press the MENU key to close the menu.
4.9

Number of Targets to Display

You can select the maximum number of AIS targets to display. The setting value is 10
to 100. When the screen becomes full of AIS targets, you can limit the number of AIS
targets to show. Targets are selected and displayed according to sort method. (See
section 4.6.)
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
5. Press the MENU key to close the menu.
or to select [AIS] and press the ENTER key.
or to select [Sector Start] and press the ENTER key.
Sector Start setting window
or to set the start point for the sector and press the ENTER key.
or to select [Sector End] and press the ENTER key.
Sector End setting window
or to set the end point for the sector and press the ENTER key.
or to select [AIS] and press the ENTER key.
or to select [Number of Targets] and press the ENTER key.
Number of Targets setting window
or to select the number of targets to display and press the ENTER key.
4. AIS OPERATION
4-5