Description Of Custom Setup Items - Furuno FR-8045 Operator's Manual

There are three default custom setups for the internal computer of the radar (see
paragraph 1.28.2 for a description). You can adjust these settings on the [Custom 1],
[Custom 2] and [Custom 3] menus to meet your navigation needs.
To activate a custom setup, press the CUSTOM key. The CUSTOM key switches be-
tween Custom 1, Custom 2 or Custom 3 each time you press the key. (Custom setup
numbers which are turned off are ignored.) The selected custom setup name is shown
at the upper-left corner. To escape from custom setup, operate any control.
1.28.2

Description of custom setup items

Menu item
[Custom1(2 or 3)] Turn on/off each custom program.
Copy settings from the [Echo] menu. The message "Com-
[Copy]
plete" appears after the copying is completed.
[Auto]: Automatic gain adjustment according to noise level.
[Gain Mode]
[Manual]: Manual gain adjustment
Copy the current position of the GAIN knob when you do
[Manual Gain]
[Copy]. This item is for read-only.
[Auto]: Automatic sea clutter adjustment according to sea
[Sea Mode] state.
[Manual]: Manual sea clutter adjustment.
[Coastal]: Suppress both land and sea clutter.
[Auto Sea] [Advanced]: Automatically discriminate land echoes from
sea reflections to suppress only sea reflections.
Copy the current position of the A/C SEA knob when you do
[Manual Sea]
[Copy]. This item is for read-only.
[Auto]: Automatic rain clutter adjustment according to rain
[Rain Mode] cloud density.
[Manual]: Manual rain clutter adjustment.
[Calm]: For light rain.
[Moderate]: When you can not reduce the rain clutter with
[Auto Rain]
[Calm] mode.
[Rough]: For heavy rain.
Copy the current position of the A/C RAIN knob when you do
[Manual Rain]
[Copy]. This item is for read-only.
[A/C Auto] [Off], [On]
[Short] or [Long], you can select on 1.5, 1.6, 3.0 and 3.2 nm
[Pulse Length]
ranges.
[Echo Stretch] [Off], [1], [2], [3]
[Echo Average] [Off], [1], [2], [Auto]
[Noise Rejector] [Off], [On]
[Wiper] [Off], [1], [2]
[Int Rejector] [Off], [1], [2], [3]
Description of custom setup items
Available settings
1. OPERATION
See section
section 1.9
section 1.10
section 1.10
section 1.11
section 1.11
section 1.12
section 1.18
section 1.22
section 1.23
section 1.30
section 1.31
section 1.14
1-35