Vector Attributes; What Is A Vector; Vector Time And Vector Reference - Furuno FR-8045 Operator's Manual

3. ARPA OPERATION
4. Use
5. Use
are erased from the screen and the long beep sounds.
6. Press the MENU key to close the menu.
3.6

Vector Attributes

3.6.1

What is a vector?

A vector is a line extending from a tracked target. A vector shows speed and course
of the target. The top of a vector shows estimated position of the target after the se-
lected vector time elapses. If you increase the vector length (time), you can evaluate
the risk of collision with any target.
Vector time
3.6.2

Vector time and vector reference

1. Press the MENU key to open the menu.
2. Use
Custom 1
Custom 2
Custom 3
Alarm
Target Trail
Tuning
Others
Target
ARPA
AIS
GPS
Adjusting a vector time to be displayed
3-4
or to select [All Cancel] and press the ENTER key.
to select [Yes] and press the ENTER key. All symbols
Predicted position of the target in 15 minutes later
Vector
Current position of the target
When vector time is 15 minutes
or to select [Target] and press the ENTER key.
Menu
Vector Time
Vector Reference
History Dots
History Interval
CPA
TCPA
Proximity
[ENTER]: Enter
[MENU]: Exit
Target menu
Target
: 6min
: True
: 5
: 1min
: Off
: 1min
: Off
[CANCEL/HL OFF]: Back
Are your sure ?
Yes
No