Automatic Adjustments Of Sea And Rain Clutters - Furuno FR-8045 Operator's Manual

Manual mode
1. Rotate the A/C RAIN knob to reduce the rain clutter.
2. Press the CANCEL/HL OFF key to close the window.
1.12

Automatic Adjustments of Sea and Rain Clutters

When you can not correctly reduce the sea clutter or rain clutter with the related con-
trol, turn on the automatic anti-clutter feature. When this feature is turned on,
"A/C AUTO" appears at the lower-right corner.
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
5. Press the MENU key to close the menu.
Caution on use
• Echoes that cover wide areas (like land and islands) can become smaller when the
[A/C Auto] is used.
• When [A/C Auto] is active, the strength of a target in sea clutter or rain clutter can
be lower than actual strength. In this case change to manual A/C SEA and manual
A/C RAIN and adjust the picture.
Rain clutter at
screen center
or to select [Echo] and press the ENTER key.
or to select [A/C Auto] and press the ENTER key.
or to select [Off] or [On] then press the ENTER key.
A/C Auto: Off
A/C RAIN control adjusted;
rain clutter reduced
Land
:£:¸ :Å :»
Target »
A/C Auto: On
1. OPERATION
Å : : ¸ : : £
1-13