Automatic Adjustments Of Sea And Rain Clutters - Furuno 1835 Operator's Manual

Note: When you want to adjust the rain clutter finely in [Auto] mode, rotate the A/C
RAIN knob. The confirmation message appears. If you select [Yes], the mode chang-
es to [Manual] mode. Rotate the A/C RAIN knob to adjust the rain clutter.
Manual mode
1. Rotate the A/C RAIN knob to reduce the rain clutter.
2. Press the CANCEL/HL OFF key to close the window.
1.12

Automatic Adjustments of Sea and Rain Clutters

When you can not correctly reduce the sea clutter or rain clutter with related control,
turn on the automatic anti-clutter feature. When this feature is turned on, "A/C AUTO"
appears at the lower-right corner.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
4. Use the Cursorpad (
5. Press the MENU key to close the menu.
Caution on use
• [A/C Auto] can lower an echo which covers a wide area, like land or an island.
• When [A/C Auto] is active, the strength of a target in sea clutter or rain clutter can
be lower than actual strength. In this case change to manual A/C Sea and manual
A/C Rain and adjust the picture.
Are you sure to change to manual mode?
Confirmation message
A/C RAIN control adjusted;
Rain clutter at
rain clutter reduced
screen center
Rain clutter
or ) to select [Echo] and press the ENTER key.
or ) to select [A/C Auto] and press the ENTER key.
or ) to select [Off] or [On] then press the ENTER key.
A/C Auto: Off
1. DESCRIPTION OF OPERATION
Land :£:¸ :Å :»
Target » Å : : ¸ : : £
A/C Auto: On
1-13