Table of Contents
Advertisement
Overview
What is the SoundPoint IP 200W
This chapter provides an overview of the SoundPoint IP 200W phone and its
available features.
The SoundPoint IP 200W phone enables you to make IP calls, landline calls,
and receive on-screen information services. Based on the SIP v2 standard, the
phone ensures compatibility with other Internet communication standards.
SIP is the Internet Engineering Task Force (IETF) standard for multimedia
conferencing over IP. It is an ASCII-based, application-layer control protocol
(defined in RFC 3261) that can be used to establish, maintain, and terminate
calls between two or more endpoints. Like other voice over IP (VoIP)
protocols, SIP is designed to address the functions of signaling and session
management within a packet telephony network.
This chapter contains information on:
•
What is the SoundPoint IP 200W
•
Available Features
To deploy SoundPoint IP 200W phones on the network, refer to
Your System
on page 3-1. To troubleshoot any problems with your
SoundPoint IP 200W phones on the network, refer to
SoundPoint IP 200W Phones
The SoundPoint IP 200W phone consists of a cordless handset and a gateway.
The handset can sit in its charging cradle when not in use. You can register up
to eight handsets per gateway, which is connected to the Internet through an
Ethernet cable or to a landline through a regular telephone cord.
Refer to the SoundPoint IP 200W Quick Start Guide for instructions on how to
charge the handset for use and install the gateway.
Refer to the User Guide for instructions on how to use the phone to place and
answer calls using VoIP or landlines, forward calls, pick up voicemail, and run
applications.
on page 4-1.
1
Setting up
Troubleshooting Your
1 - 1
Advertisement
Table of Contents
