Table of Contents
Advertisement
Note
Changing Languages
2. Enable SRV on the gateway by changing the configuration file as follows:
%SRV_0_SIP_UA_DATA_SERVER_PORT%:0
%SRV_0_SIP_UA_DATA_PROXY_ADDR%:"domain.com"
%SRV_0_SIP_UA_DATA_DOMAIN%:"domain.com"
Setting the server port to 0 in the Web user interface or configuration file
enables SRV.
In the example above, the gateway will attempt to contact
callserver1.domain.com first. If it does not respond within 10 seconds,
then callserver2.domain.com will be contacted.
DNS queries are cached and expire based on the TTL value defined in the DNS
query response.
You can change the language displayed on the phone by selecting Settings >
System Settings > Languages. If you change the language, the phone will
search for the specific language file on the boot server and essentially perform
a firmware update. This may take some time. As English resides in every
language file, a firmware upgrade is not performed when reverting back to
English from another language. The German language is loaded by default.
The following languages are supported:
•
German (Deutsch)
— PereGw_de02_v0790.fwu
— PerePp_de02_v0790.fwu
•
Danish (Dansk)
— PereGw_dk03_v0790.fwu
— PerePp_dk03_v0790.fwu
•
Spanish (Español)
— PereGw_es07_v0790.fwu
— PerePp_es07_v0790.fwu
•
French (Français)
— PereGw_fr01_v0790.fwu
— PerePp_fr01_v0790.fwu
Setting up Your System
3 - 17
Advertisement
Table of Contents
