Table of Contents
Advertisement
Setting up Your System
Setting Up the Network
Your SoundPoint IP 200W SIP phone is designed to be used like an IP phone
on an IP network. At this point, it is assumed that you have already:
•
Established a working IP network
•
Configured VoIP gateways for SIP
•
Configured a call server to receive and forward SIP messages
This chapter provides basic instructions for setting up your SoundPoint IP
200W phones. This chapter contains information on:
•
Setting Up the Network
•
Setting Up the Boot Server
•
Deploying Phones From the Boot Server
•
Updating Firmware
•
Setting Up DNS SRV Failover
•
Changing Languages
•
Changing Call Progress Tones
For more information on the configuration files, refer to
page A-1. To troubleshoot any problems with your SoundPoint IP phones on
the network, refer to
Troubleshooting Your SoundPoint IP 200W Phones
page 4-1.
You can perform basic TCP/IP network setup, such as IP address and subnet
mask, to get your organization's phones up and running.
This section provides information on:
•
Supported Provisioning Protocols
3
Configuration File
on
on
3 - 1
Advertisement
Table of Contents
