Overview - Valor 1200EAN (NG) Installation And Owner's Manual

Fire On/Off
Wall Switch
(optional)
Remote
Handset
Wall Holder
Optional Doors and
Plates—see Options
Wall Finish
butted
up to the
edge of
door plate
Non-combustible Hearth—
See Hearth Requirements
WARNING
!
Some materials or items, although safe, Some materials or items, although safe,
may discolor, shrink, warp, crack, peel, and may discolor, shrink, warp, crack, peel, and
so on because of the heat produced by the so on because of the heat produced by the
fi replace. Avoid placing candles, paintings, fi replace. Avoid placing candles, paintings,
photos, and other items sensitive to heat photos, and other items sensitive to heat
around the fi replace. around the fi replace.

Overview

Mantel—See Mantel Clearances
Combustible Floor 1/2" Insulation Board
Framing—See Framing
Cement Board—Combustible
wall fi nish may butt up to but
not cover cement board
When the appliance is installed directly on
carpeting, tile or other combustible material
other than wood fl ooring, the appliance shall
be installed on a metal or wood panel extend-
ing the full width and depth of the appliance
WARNING
!
HOT HEARTH / FLOOR! The hearth or fl oor HOT HEARTH / FLOOR! The hearth or fl oor
in front of the fi replace may become very in front of the fi replace may become very
hot when the fi replace heats. Do not use the hot when the fi replace heats. Do not use the
hearth as a seat or shelf. Solid wood fl ooring hearth as a seat or shelf. Solid wood fl ooring
in front of the fi replace (if allowed) may in front of the fi replace (if allowed) may
shrink during the heating season due to heat. shrink during the heating season due to heat.
QUALIFIED
INSTALLER
Decorative Light
Dimmer Switch
(not provided)
1200EA
19