Table of Contents
Advertisement
QUALIFIED
INSTALLER
1/2" thick cement board required
above and on each side of engine
(supplied w/engine) - Combustible
wall finish may butt up to but not
cover cement board
When the appliance is
installed directly on
carpeting, tile or other
combustible material
other than wood
flooring, the appliance
shall be installed on a
metal or wood panel
extending the
full width and depth
of the appliance
FRAMING DIMENSIONS
26
Framing
Any surface directly in front of
the unit which is at a height of
less than 4" from the bottom of
the unit must be non-combustible.
See chart for minimum
non-combustible projection
required to protect combustible
flooring in front.
Between underside
of header and base of
heater. Note: May
increase if raising heater
further. See Hearth
Requirements Section.
50"
Advertisement
Table of Contents
