Table of Contents
Advertisement
D385 User Manual
Rejecting anonymous calls
With this setting you can have your phone reject calls from phones that are blocking or not
transmitting their numbers.
Please note: Calls from analog phone connections without caller ID will, most likely,
be received as anonymous calls. They will be rejected when you turn this function on.
Activating rejection of anonymous calls
1. Press
2. Select Call Features and press
3. Select Incoming Calls and press
4. Select "Reject anonymous". The default setting is off (Fig. 1).
5. Press
to change the setting to on (Fig. 2). (When the function is active, pressing
off.)
Fig. 1
6. Press
for two seconds to return to the idle screen.
C
all forwarding
The phone can be set to forward incoming calls, either always or under certain conditions. The
settings can be done on the phone and on the web interface. For further information on using the web
interface for these settings, see "Call forwarding" on page 85.
Note: Call forwarding is set separately for each configured identity. When the setting is
done on the phone, it applies to the identity selected as outgoing identity.
Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox
specified as this function's target.
Forwarding all calls is off
.
.
Fig. 2
All incoming calls are forwarded
66
Using the Phone
will turn it
Advertisement
Table of Contents
