Table of Contents
Advertisement
SUPERSERVER 6027TR-D71RF/D71QRF/D71FRF USER'S MANUAL
1-3
Server Chassis Features
The following is a general outline of the main features of the SC827 server chassis.
System Power
Each SC827 chassis model includes a high-effi ciency 80-plus Platinum certifi ed
power supply, rated at 1280 Watts plus one redundant backup power supply.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
SATA Subsystem
The SC827 supports up to twelve (12) 3.5" hot-swap SATA drives in trays (6 for
each node). These drives are hot-swappable units and are connected to a backplane
that provides power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the drives.
Front Control Panel
SC827HD-R1K28B chassis includes two front panels on the handles of the chassis
which control each of the systems. Each control panel on the SuperServer 6027TR-
D71RF/D71QRF/D71FRF provides you with system monitoring and control for one
server node. LEDs indicate system power, HDD activity, network activity, system
overheat and power supply failure. A main power button and a system reset button
are also included.
I/O Ports
The SC827 is an propriertary form factor chassis designed to be used in a 2U
rackmount confi guration. The SC827 chassis provides one low-profi le and two full
height add-on card slots, a COM port, a VGA port, two USB 2.0 ports, one IPMI
Ethernet port and two Ethernet ports per node.
Cooling System
The SC827 chassis accepts four system fans powered from either backpane
or the serverboards. If not powered from the backpane, the SC827HD-R1K28B
model chassis powers four fans from two motherboards, so that when one of the
motherboard drawers is removed, the other motherboards will continue running
all fans.
1-4
Advertisement
Table of Contents
