Supermicro SUPERO 6027TR-D71RF SUPERSERVER User Manual page 116

SUPERSERVER 6027TR-D71RF/D71QRF/D71FRF USER'S MANUAL
Caution: Enabling ASPM support may cause some PCI-E devices to fail!
SXB1 PCI-E 3.0 x16 Option ROM
Select Enabled to enable CPU1 SXB1 PCI-E 3.0 x16 Option ROM to boot the
system via a device installed on this slot. The options are Disabled and Enabled.
SXB3 PCI-E 3.0 x16 Option ROM
Select Enabled to enable CPU2 SXB3 PCI-E 3.0 x16 Option ROM to boot the
system via a device installed on this slot. The options are Disabled and Enabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are iSCSI and PXE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable Onboard LAN1 Option ROM or Onboard LAN2 Option
ROM to boot the system via a device installed on the onboard LAN port as
specifi ed. The options are Enabled and Disabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
7-16