Table of Contents
Advertisement
6-3
Chassis Cover
Before operating the SC827HD chassis for the fi rst time, it is important to remove
the protective fi lm covering the top of the chassis, in order to allow for proper
ventilation and cooling.
Removing the Chassis Cover and Protective Film
1. Remove the two screws which secure the top cover onto the chassis as
shown above.
2. Lift the top cover up and off the chassis.
3. Peel off the protective fi lm covering the top cover and the top of the chassis
4. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
3
1
Caution: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airfl ow and prevent
overheating.
Figure 6-2. Removing the Chassis Cover
1
1
Remove two
screws
Chapter 6: Advanced Chassis Setup
2
1
Check Ventilation
Openings
6-3
4
1
Advertisement
Table of Contents
