Dimm Module Population Confi Guration - Supermicro SUPERO 6027TR-D71RF SUPERSERVER User Manual

DIMM Module Population Confi guration
For memory to work properly, follow the tables below for memory installation:
UDIMM Support on the E5-2600 Series Processor Platform
DIMMs Populated
per DDR Channel
1
RDIMM Support on the E5-2600 Series Processor Platform
DIMMs Populated
per DDR Channel
1
LRDIMM Support on the E5-2600 Series Processor Platform
DIMMs Populated
per DDR Channel
1
Note 1: For the memory modules to work properly, please install DIMM modules in
pairs (w/even number of DIMMs installed).
Note 2: All channels in a system will run at the fastest common frequency.
Possible System Memory Allocation & Availability
System Device
Firmware Hub fl ash memory (System BIOS)
Local APIC
Area Reserved for the chipset
I/O APIC (4 Kbytes)
PCI Enumeration Area 1
PCI Express (256 MB)
PCI Enumeration Area 2 (if needed) -Aligned on 256-M
boundary-
VGA Memory
TSEG
Memory available for the OS & other applications
Chapter 5: Advanced Motherboard Setup
UDIMM Type POR Speeds
(Unb. DIMM) (in MHz)
ECC/Non-ECC DDR3
RDIMM Type POR Speeds
(Reg. DIMM) (in MHz)
Reg. ECC DDR3 1066, 1333, 1600
LRDIMM Type POR Speeds
(Load Reduced (in MHz)
DIMM)
LR ECC DDR3
5-11
Ranks per DIMM
(Any Combination)
1066, 1333
Ranks per DIMM
(Any Combination)
Ranks per DIMM
(Any Combination)
1066, 1333
Size Physical Memory Available
(4 GB Total System
Memory)
1 MB 3.99 GB
4 KB 3.99 GB
2 MB 3.99 GB
4 KB 3.99 GB
256 MB 3.76 GB
256 MB 3.51 GB
512 MB 3.01 GB
16 MB 2.85 GB
1 MB 2.84 GB
2.84 GB
SR, DR
SR, DR
QR