Installing Add-On And Riser Cards Onto The Motherboard - Supermicro SUPERO 6027TR-D71RF SUPERSERVER User Manual

Installing Add-On and Riser Cards onto the Motherboard

Installing Expander and Riser Cards (Figure 6-16)
1. Disconnect the chassis from any power source.
2. Attach the riser card to the riser card bracket as described in the previous
section.
3. Remove the PCI slot shield.
4. Insert the expander card into the riser card
5. Align the PCI slot shield with the opening in the rear of the motherboard node
drawer and insert the riser card into the motherboard.
6. Close the PCI slot clip and secure the riser card bracket to the top of the
motherboard node drawer using the screw provided.
Figure 6-16: Installing the Add-On Card
PCI Slot
Shield
Add-On Card
6-17
Chapter 6: Advanced Chassis Setup
Riser Card
Screw
Bracket
Riser Card