Leds - H3C S5810-50S Installation Manual

Transceiver/
Cable type
Short-haul
10G SFP+
cable
H3C provides three types of SFP+ cables with various lengths, as shown in
Figure 1-7 SFP+ cable
(1) Connector
You are recommended to use SFP+ transceivers of H3C on the S5810 series.
The types of SFP+ transceivers may update with time. For information about transceivers, contact
technical support.
For the models and specifications of each kind of transceivers, refer to H3C Low End Series
Ethernet Switches Pluggable Modules Manual.

LEDs

Table 1-9 LEDs
System status LED
Hot swappable power module LED
Seven-segment LED
Port mode LED
10/100/1000Base-T auto-sensing Ethernet
port status LED
100/1000Base-X SFP interface status LED
Transceiver/ Central
Cable wavelength
LSWM1STK
—
LSWM2STK
LSWM3STK
LED
Connector
1X
SFP+ cable
Infiniband
(2) Handle
Description
See System LED on page 1-10.
See Power Module Status LEDs
See Seven-Segment LED
See Port Mode LED on page 1-11.
See 10/100/1000Base-T Auto-Sensing Ethernet Port
Status LED on page 1-12.
See 100/1000Base-X SFP Interface Status LED
page 1-12.
1-9
Max
Fiber transmission
distance
0.65 m (2.1 ft.)
1.2 m (3.9 ft.)
3 m (9.8 ft.)
Figure 1-7.
on page 1-10.
on page 1-10.
on