Table of Contents
Advertisement
After loading the application file, use the reboot command to restart the switch to make the update
take effect (make sure you have saved other configurations before restart).
If the flash memory does not have enough space, you can load the Boot ROM file first, and then
delete certain application files from the flash memory (you are recommended to delete the unused
host program files); then, load the application file to the switch through FTP for update.
Avoid any power failure during the loading process.
Loading Software Using TFTP
Loading a file through TFTP is similar to loading a file through FTP. The switch can serve only as a
TFTP client that downloads the file from the TFTP server to its flash memory. The procedure after
download is the same as loading the file remotely through FTP.
5-20
Advertisement
Table of Contents
