Table of Contents
Advertisement
Connecting the Power Cord
Connecting an AC Power Cord
Step1 Switch off the AC power module.
Step2 Pull the bail latch upwards (see
Step3 Connect one end of the AC power cord to the AC receptacle on the power module (see callout 1 in
Figure
3-16).
Step4 Pull the bail latch down to secure the plug to the AC receptacle (see callout 2 in
Step5 Connect the other end of the AC power cord to the external AC power supply system.
Figure 3-15 Connect an AC power cord I
Figure 3-16 Connect an AC power cord II
Connecting a DC Power Cord
Step1 Switch off the DC power module.
Step2 Keep the upside of the DC plug shipped with the device on top and plug it in the DC receptacle (see
callout 1 in
Figure
specific structure design of the DC receptacle and the plug.)
Figure
3-15).
3-17). (If you plug it with the upside down, the insertion is not smooth because of the
3-10
Figure
3-16).
Advertisement
Table of Contents
