Table of Contents
Advertisement
Will you Update Basic BootRom? (Y/N):Y
The system asks you whether you want to update the basic Boot ROM section. Click Y and then the
system displays the following information after the update is completed.
Updating Basic BootRom...........Done!
Updating extended BootRom? (Y/N):Y
The system asks you whether you want to update the extended Boot ROM section. Click Y. Then the
system displays the following information after the update is completed:
Updating extended BootRom.........Done!
Please change the terminal's baudrate to 9600 bps, press ENTER when ready.
8)
Restore the download rate to the default
Set the baud rate to 9600 bps (refer to
detailed operation).
If you select 9600 bps as the download rate, skip this step, that is, you do not need to modify the baud
rate of the HyperTerminal.
9)
Restart the switch to make the updated Boot ROM file effective
Press any key to return to the Boot ROM update menu.
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
Enter 0 to return to the Boot ROM menu, and then enter 0 again. After that, the device is restarted and
the updated Boot ROM file becomes effective.
Loading an application file
To load the application file of the switch, enter 1 in the Boot ROM menu. The system displays the
following information:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):3
Select an appropriate protocol in
The procedure of loading an application file is similar to that of upgrading the Boot ROM program. The
difference lies in that the system displays the prompt of loading the application file rather than the
upgrading the Boot ROM program.
After the application file is loaded, the switch displays that you should set the application attribute, that
is, main, backup, or none. Type a specific attribute to complete loading the application file.
Change the rate of the serial port on the terminal
Table 5-4
to load the application file.
5-10
on page
5-6
for
Advertisement
Table of Contents
