Table of Contents
Advertisement
Interface
mode LED
Steady yellow
(duplex mode)
SFP+ Interface Status LED
The port mode LED and the SFP+ status LED together indicate the SFP+ interface operation status, as
shown in
Table
1-16.
Table 1-16 SFP+ status LEDs description
Port mode
LED
Steady green
(rate mode)
Steady yellow
(duplex mode)
Management Ethernet Port Status LED
Table 1-17 The S5810 management Ethernet port status LED description
Mark
Status
Off
LINK
Steady green
Off
ACT
Flashing
yellow
Status
SFP interface
status LED
Flashing yellow (3
Hz)
Off
Steady green
Flashing yellow (3
Hz)
Status
Ethernet port status
LED
Steady green
Flashing yellow (3 Hz)
Off
Steady green
Flashing yellow (3 Hz)
Off
The management Ethernet port is not connected.
The management Ethernet port operates at a rate of 10/100/1000 Mbps.
The management Ethernet port is not receiving or sending data.
The management Ethernet port is receiving or sending data.
POST failed on the interface.
No link is present on the interface.
The interface operates in full duplex mode; the LED fast
flashes when data is being sent and/or received on the
interface.
POST failed on the interface.
The port operates at the rate of 10 Gbps; the LED is fast
flashing when data is being sent and/or received on the
port.
POST failed on the port.
No link is present on the port.
The port operates in full-duplex mode; the LED is fast
flashing when data is being sent and/or received on the
port.
POST failed on the port.
No link is present on the port.
Description
1-13
Meaning
Meaning
Advertisement
Table of Contents
