Table of Contents
Advertisement
Rear Panel
Figure 1-6 S5810-50S-DC rear panel
(1) DC power module 1
(3) Fan tray
(5) Grounding screw
(7) Management Ethernet port status LED (LINK)
The S5810-50S-DC provides a PSR300-12D1 DC power module when shipped. Power module 2 is
installed with a filler panel. You can select two power modules to implement 1+1 power supply
redundancy. See
by the S5810 series. See H3C PSR300-12A & PSR300-12D1 Power Module User Manual for the
detailed description of the power modules.
Ports
Console Port
Each S5810 series provides one console port on the front panel.
specifications.
Table 1-2 Console port specifications
Item
Connector type
Compliant standard
Transmission baud
rate
Service
Default connection
parameters
Hot Swappable Power Modules
RJ-45
EIA/TIA-232
9600 bps to 115200 bps
It can be connected to an ASCII terminal.
It can be connected to a serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.
Baud rate: 9600 bps
Data bits: 8
Parity check: none
Stop bits: 1
(2) Power module slot 2
(4) Management Ethernet port
(6) Management Ethernet port status LED (ACT)
on page
1-14
for the power module models supported
Table 1-2
Specification
1-5
describes the console port
Advertisement
Table of Contents
