Table of Contents
Advertisement
Figure 5-9 Load software through FTP
Suppose the Boot ROM and application files are stored in the file named update.bin, follow these steps
after you telnet to the switch.
Step1 Download the file to the switch using FTP.
<H3C> ftp 202.10.10.53
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):admin
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get update.bin update.bin
[ftp] bye
Step2 Upgrade the Boot ROM program.
<H3C> bootrom update file update.bin
This command will update bootrom file, Continue? [Y/N]:y
Now updating bootrom, please wait...
Step3 Load the application file, and specify the file as the main program file.
<H3C> boot-loader file update.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
<H3C> display boot-loader
Current boot app is:
Next main boot app is:
Next backup boot app is:
<H3C> reboot
flash:/update.bin
flash:/update.bin
flash:/update.bin
5-19
Advertisement
Table of Contents
