Preparing The Filter Unit For Use - Frymaster 47 SERIES Installation, Operation, Service, And Parts Manual

The overwhelming majority of reported prob-
lems with the FootPrint III system have been
found to be the result of improper operation.
Careful attention to the step-by-step instruc-
tions that follow will ensure that your system
operates as intended.

PREPARING THE FILTER UNIT FOR USE

1. Slide the filter unit from the cabinet.
2. Open the cover and remove the crumb tray
and the paper hold-down ring.
CAUTION
Make sure the inside of the pan is free
of all food and breading particles that
could prevent the paper from sealing
against the bottom of the pan.
47 SERIES GAS FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
3. Ensure that the metal filter screen is in the
bottom of the pan.
4. Lay a sheet of filter paper over the top of
the filter pan, overlapping on all sides.
5. Position the hold-down ring over the filter
paper and lower the ring into the pan, al-
lowing the paper to fold up around the ring
as it is pushed to the bottom of the pan.
4-2