Computer Magic Iii Controller - Frymaster 47 SERIES Installation, Operation, Service, And Parts Manual

NOTE:
Some computers
may have this
earlier style
ON/OFF Switch:
ON
OFF

COMPUTER MAGIC III CONTROLLER

The Computer Magic III control panel in-
cludes the following items:
1/2. Left and Right LED Displays
1/3. Temperature Check and Program Lock
Switch
4/5. Left and Right Frypot Power Switches
NOTE: On single vat units, either
switch will turn the fryer on and off.
6/7. Left and Right Product Selection and
Coding Keys
1/8. Program Mode Switch
COMPUTER OPERATING INSTRUCTIONS
Turn the computer on by pressing the Power
Switch (or ON/OFF Switch
A decimal between digits 1 and 2 in either
LED Display indicates that the burner is on.
47 SERIES GAS FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
1 4
c y c l
Frymaster
4 4
L 1 2 3 5
6
COMPUTER MAGIC III
ON
). NOTE:
OFF
3 5
c y c l
COMPUTER MAGIC
6 7 8 9
8 7
1. One of the following will be displayed:
a. cycl cycl, indicating that the fryer is oper- cycl cycl
ating in the melt cycle mode.
fryer will remain in the melt cycle
mode until it reaches 180ºF (82ºC) or
is canceled manually by pressing the R
key.
Do not cancel the melt cycle mode
until solid shortening is completely
b. hi hi hi hi, indicating that the frypot tempera-
ture is 21ºF (12ºC) higher than the set-
point.
c. LO LO LO LO, indicating that the frypot tempera-
ture is 21ºF (12ºC) lower than the set-
point.
3-5
2
0 R
CAUTION
melted.
The