47 SERIES GAS FRYERS
CHAPTER 6: OPERATOR TROUBLESHOOTING
Troubleshooting Fryers Equipped with Computer Magic III Computers
FRYER OPERATING
NORMALLY, BUT
FLAMES ARE ROLLING
OUT THE FRONT OF
THE BURNER.
Press Power Switch OFF,
disconnect unit from electrical
power, place gas valve in
OFF position. Remove and
clean gas valve vent tube.
Reinstall gas valve vent tube.
Reconnect unit to electrical
power. If unit is not equipped
with electronic ignition, relight
pilot. Press Power Switch ON.
Does fryer
Problem is beyond
Yes
No
operate properly?
scope of Operator
Troubleshooting.
Problem resolved.
Call Service Technician.
6-14