Panasonic KX-TDE100 Programming Manual page 1008

Feature Programming References
Ring Tone Pattern Selection
•
4.15 [2-8-1] Ring Tone Patterns—Call from CO—
•
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone—
•
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
•
4.18 [2-9] System Options—Option 1—
•
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
•
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
Room Status Control
•
6.5 [4-1-4] Wired Extension—Flexible Button—
•
6.17 [4-3] DSS Console—
•
8.2 [6-2] Hotel & Charge
–
Main— Hotel Operator—Extension 1–4
–
Bill— Checkout Billing—Billing for Guest
Feature Guide References
1.27.2 Room Status Control
Self Labelling (KX-NT366 only)
•
6.5 [4-1-4] Wired Extension—Flexible Button—
Feature Guide References
1.31.4 Self Labelling (KX-NT366 only)
SIP (Session Initiation Protocol) Extension
•
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
•
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
•
3.19 [1-1] Slot—Port Property - Virtual SIP Extension Port—Connection Command
Feature Guide References
1.31.2 SIP (Session Initiation Protocol) Extension
SNMP (Simple Network Management Protocol)
•
13.4 [11-4-1] SNMP—System Setting
•
13.5 [11-4-2] SNMP—Manager
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
Software Upgrading
•
2.6.2 Utility—File Transfer PC to PBX (SD Card)
Feature Guide References
2.3.8 Software Upgrading
Special Carrier Access Code
•
9.3 [7-3] Special Carrier
1008 PC Programming Manual
PT Operation—PT Ring Off Setting
Type
Type
Label Name
Ring Tone Pattern Plan 1–8
Ring Tone Pattern Plan 1–8
Extension—Ring Tone Pattern Plan 1–8
Ring Pattern Table
Ring Pattern Table