Teac MT-20D-IO Maintenance Manual page 177

(j) Insert the contacts of both the reel motors into the connector
housing after threading their cables through the bead (Table 405).
Table 405 Connection of reel motors
Lead Color Pin No.
Red
5
Reel motor (F)
Black
6
Red
7
Reel motor (R)
Black
8
(k) Connect the connector
J8.
(1) Perform cable treatment within the chassis in accordance with Item
4-2-4.
(m) Adjust the positions of the reel motor
(F),
(R) Ass'y in
accordance with Item 4-3-1.
(n) Check the rotary direction of each reel motor in accordance with
Item 4-3-3.
(0)
Check and adjust the tape speed in accordance with Item 4-3-11.
(p) Check the start/stop time in accordance with Item 4-3-12.
(q) Check the ISV in accordance with Item 4-3-13.
(r) Attach the PCBA Interface Control in accordance with Item 4-4-10.
(5)
Attach the protector guide in accordance with Item 4-2-3.(2).
(t) Perform the overall check in accordance with Item 4-3-22.
- 4084 -